OK Tigrod 316L
Bare corrosion resisting chromium-nickel-molybdenium welding rods for welding of austenitic stainless alloys of 18% Cr - 8% Ni and 18% Cr - 10% Ni - 3% Mo-types. OK Tigrod 316L has a good general corrosion resistance, particularly against corrosion in acid and chlorinated environments. The alloy has a low carbon content which makes it particularly recommended were there is a risk of intergranular corrosion. The alloy is widely used in the chemical and food processing industries as well as in ship building and various types of architectual structures.
Typical Charpy V-Notch Properties
| as welded | ||||
Typical Tensile Properties
| Condition | Elongation | Tensile Strength | Yield Strength |
| As Welded | 32 % | 600 MPa (87 ksi) | 470 MPa (68 ksi) |
Classifications
| Wire Electrode |
Werkstoffnummer : ~1.4430 SFA/AWS A5.9 : ER316L EN ISO 14343-A : W 19 12 3 L |
Approvals
| Approvals |
ABS ER 316L BV 316L BT CE EN 13479 CWB ER316L DNV-GL VL 316 L (I1) NAKS/HAKC 1.6 - 3.2 mm VdTÜV 04270 |
| Approvals are based on factory location. Please contact ESAB for more information. |
Consumable Characteristics
| Alloy Type | Austenitic (with approx. 10 % ferrite) 19% Cr - 12% Ni - 3% Mo - Low C |
| Shielding Gas | I1 (EN ISO 14175) |
Typical Weld Metal Analysis %
| Typical Wire Composition % | ||||||||||||||
| C | Cr | Cu | FN WRC-92 | Mn | Mo | N | Ni | P | S | Si | ||||
| 0.01 % | 18.2 % | - | 7 % | 1.7 % | 2.6 % | 0.04 % | 12.0 % | - | - | 0.4 % | ||||
| Typical Weld Metal Analysis % | ||||||||||||||
| 0.01 % | 19 % | 0.1 % | - | 1.8 % | 2.6 % | - | 12 % | 0.02 % | 0.01 % | 0.4 % | ||||
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.