OK Tigrod Ni-1
A bare nickel based rod alloyed with about 3 % Ti for welding of high purity nickel (min 99.6 %Ni), ordinary wrought nickel and nickel with reduced C content. The weld metal can be used in a wide range of applications were the construction is working with corrosive media.
Classifications
| Wire Electrode |
SFA/AWS A5.14 : ERNi-1 EN ISO 18274 : S Ni 2061 (NiTi3) |
Approvals
| Approvals |
VdTÜV 12659 VdTÜV 12665 |
| Approvals are based on factory location. Please contact ESAB for more information. |
Consumable Characteristics
| Alloy Type | Nickel (Ni + 2.5 % Ti) |
| Shielding Gas | I1, I2, I3 (EN 439) |
Typical Weld Metal Analysis %
| Typical Weld Metal Analysis % | ||||||||||||||
| Al | C | Cu | Fe | Mn | Ni | P | S | Si | Ti | |||||
| 0.1 % | 0.02 % | 0.1 % | 0.2 % | 0.4 % | 93 % | 0.01 % | 0.01 % | 0.3 % | 3 % | |||||
| Typical Wire Composition % | ||||||||||||||
| 0.06 % | 0.01 % | 0.01 % | 0.04 % | 0.4 % | 96 % | - | - | 0.5 % | 3.1 % | |||||
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.