Exaton 316/316L
316/316L is used for joining stainless CrNiMo and CrNi steels, stabilized or non-stabilized, e.g. ASTM 316, 316L and 316Ti as well as 304, 304L, 321 and 347, used for service temperatures up to 400°C (750°F). It is also used for Cr steels with max. 19% Cr.It is used for TIG-welding.
Typical Charpy V-Notch Properties
| as welded | ||||
Typical Tensile Properties
| Condition | Elongation | Tensile Strength | Yield Strength |
| As Welded | 39 % | 610 MPa (88 ksi) | 500 MPa (73 ksi) |
Classifications
| Wire Electrode |
SFA/AWS A5.9 : ER316L EN ISO 14343-A : W 19 12 3 L Werkstoffnummer : 1.4430 |
Approvals
| Approvals |
CE EN 13479 DNV-GL VL 316L VdTÜV 00066 |
| Approvals are based on factory location. Please contact ESAB for more information. |
Consumable Characteristics
| Alloy Type | Austenitic (with appr. 8 % ferrite) 19 % Cr - 12 % Ni - 3 % Mo - Low C |
| Shielding Gas | I1 (EN ISO 14175) |
Typical Weld Metal Analysis %
| Typical Wire Composition % | ||||||||||||||
| C | Cr | Cu | FN WRC-92 | Mn | Mo | N | Nb | Ni | P | S | Si | |||
| 0.015 % | 18.5 % | 0.1 % | 9 % | 1.7 % | 2.6 % | 0.04 % | 0.02 % | 12 % | <0.025 % | 0.015 % | 0.4 % | |||
| Typical Weld Metal Analysis % | ||||||||||||||
| <0.02 % | 18 % | 0.1 % | 7 % | 1.7 % | 2.5 % | 0.05 % | 0.01 % | 12 % | <0.03 % | <0.02 % | 0.4 % | |||
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.